Considering Paper bowl machine safety during production.

Paper bowl is a common container in our life, because it will come into contact with our food, so its safety is a very concerned issue for every consumer.

So, what about the safety of the paper bowl machine in the production process? In fact, if we look closely, we can see that the inner surface of the paper bowls that we often use has a reflective film.

This material is a polyethylene water-repellent membrane, and every paper bowl machine must ensure the existence of this membrane during the production process. However, according to different materials and use processes, the membranes produced by many inferior paper bowl machines are easily oxidized into compounds that are harmful to the human body under the action of air.

Therefore, in the paper bowl machine industry, this film-adding process is generally called the soul process in the paper bowl machine production process.

For the maintenance of the paper bowl machine, we need to understand some basic principles of the cam mechanism, the chain drive mechanism and the indexing box. Among them, we should understand the necessary conditions for the normal operation of the machine, and the influence of the temperature control of each heater on the cup after molding. Too high or too low temperatures can cause bursting or leaking at the bottom of the cup.

For the domestic paper bowl machine, the most favorite problem is the knurling mill. This part is the key. The pressure should not be increased too much. For the ultrasonic welding machine, the frequency of the ultrasonic wave must be adjusted, and the pressure should not be too large. Please try to maintain the pressure balance.